• Nowy
FIT OWEX - 1-Wire Expander Module - FlameIT - Immersion Cooling
  • FIT OWEX - 1-Wire Expander Module - FlameIT - Immersion Cooling
  • FIT OWEX - 1-Wire Expander Module - FlameIT - Immersion Cooling
  • FIT OWEX - 1-Wire Expander Module - FlameIT - Immersion Cooling
  • FIT OWEX - 1-Wire Expander Module - FlameIT - Immersion Cooling

FIT OWEX - 1-Wire Expander Module - FlameIT - Immersion Cooling

500,00 zł

500,00 zł netto

Ilość
Ostatnie sztuki w magazynie

 

Płatności | Dostawa

 

Regulamin

 

Gwarancja | Zwroty

Features

  • Allows Easy Interface Between an I2C Micro Port and a 1-Wire Slave
  • Integrates with OWFS (One Wire File System) without any problems. Sesnors are then visible on system as files.
  • I2C Host Interface Supports 100kHz and 400kHz I2C Communication Speeds
  • 8 Channels of Independently Operated 1-Wire I/O.
  • Each 1-Wire Channel is ESD protected: DS9503
  • 1-Wire Master I/O with Selectable Active or Passive 1-Wire Pullup
  • Provides Reset/Presence, 8-Bit, Single-Bit, and 3-Bit 1-Wire I/O Sequences
  • Standard and Overdrive 1-Wire Communication Speeds 2
  • Three Address Inputs for I2C Address Assignment [AD0, AD1, AD3 goldpins]
  • Minimizes Line Noise, Reducing System EMI
  • Slew-Controlled 1-Wire Edges
    • Supports EEPROMs, Temp Sensors, or Other 1-Wire Slaves That Have Momentary High Source Current Modes
    • Strong 1-Wire Pullup Provided by an Internal Low-Impedance Signal Path
  • PCTLZ Output to Optionally Control an External MOSFET for Stronger Pullup Requirements
  • Wide Operating Range: 2.9V to 5.5V, -40°C to +85°C
  • RoHS Compliant

The DS2482-800 is an I²C to 1-Wire® bridge device that interfaces directly to standard (100kHz max) or fast (400kHz max) I²C masters to perform bi-directional protocol conversion between the I²C master and any downstream 1-Wire slave devices. Relative to any attached 1-Wire slave device, the DS2482-800 is a 1-Wire master. Internal factory-trimmed timers relieve the system host processor from generating time-critical 1-Wire waveforms, supporting both standard and Overdrive 1-Wire communication speeds. To optimize 1-Wire waveform generation, the DS2482-800 performs slew-rate control on rising and falling 1-Wire edges and has a programmable feature to mask the fast presence pulse edge that some 1-Wire slave devices can generate. Programmable strong pullup features support 1-Wire power delivery to 1-Wire devices such as EEPROMs and sensors. The DS2482-800 combines these features with eight independent 1-Wire I/O channels. The I²C slave address assignment is controlled by three binary address inputs, resolving potential conflicts with other I²C slave devices in the system.

Dokumentacja

FlameIT - Immersion Cooling - OWEX - 1-Wire Expander

Model 3D

https://grabcad.com/library/fit-em-owex-1-wire-expander-module-flameit-immersion-cooling-1

FIT-EM-OWEX-V2
3 Przedmioty

Specyficzne kody

MPN
FIT-EM-OWEX-V2
chat Komentarze (0)
Na razie nie dodano żadnej recenzji.